Product ID:GRAY PITT-THERM, UC59571
MSDS Date:11/25/1992
FSC:8010
NIIN:00N068652
MSDS Number: CCBSZ

PPG INDUSTRIES INC

4325 ROSANNA DRIVE
ALLISON PARK, PA 15101
US

Emergency Phone: 304-843-1300

Info Phone: 216-572-6111;800-441-9695

Cage: DO542

PPG INDUSTRIES INC. COATINGS & RESINS GP

9 ALLISON PARK, PA 15101

Telephone: 412-492-5555

Cage: DO542

TITANIUM OXIDE;(TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 15-20%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

MUSCOVITE (HYDROUS ALUMINA SILICATE);(MICA)

CAS: 1318-94-1

Fraction By Weight: 10-15%

OSHA PEL N/K

ACGIH TLV: N/K

XYLENE (SARA 313) (CERCLA)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 15-20%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM; 150 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

TOLUENE (SARA 313) (CERCLA)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 10-15%

OSHA PEL 200 PPM; Z-2

ACGIH TLV: 50 PPM, S

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

BUTYL ALCOHOL;(NORMAL BUTYL ALCOHOL) (SARA 313) (CERCLA)

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: 10-15%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM, S, C

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

FILM FORMERS (INCLUDING ING 7 & 8)

OSHA PEL N/K

ACGIH TLV: N/K

RESIN

OSHA PEL N/K

ACGIH TLV: N/K

ADDITIVES

OSHA PEL N/K

ACGIH TLV: N/K

ANTIMONY (SARA 313) (CERCLA)

CAS: 7440-36-0

RTECS: CC4025000

Fraction By Weight: <1%

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG (SB)/M3

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ANIMALS INHALING MASSIVE QTYS OF TITANIUM

RTECS: 9999999ZZ

TOLUENE APPEARS ON THE NAVY LISTING OF OCCUP

RTECS: 9999999ZZ

APPROP HLTH PROFESSIONALS CONCERNING LATEST HAZARD

RTECS: 9999999ZZ

MAY CAUSE EYE WATERING, HDCH, NAUS, DIZZ & LOSS OF

RTECS: 9999999ZZ

REDNESS, ITCHING, BURNING SENSATION & VISUAL

RTECS: 9999999ZZ

BURNING, REDNESS, & SWELLING ARE CONDITIONS ASSOC

RTECS: 9999999ZZ

CONTROL CENTER, EMERGENCY ROOM OR MD IMMED;

RTECS: 9999999ZZ

DETERMINE TYPE OF AIRBORNE CONTAMS AGAINST WHICH

RTECS: 9999999ZZ

LIMS, THE LEL BELOW STATED LIM & TO REMOVE DECOMP

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INGEST: HARMFUL/FATAL IF INGEST.
DRIED FILM OF THIS PAINT MAY BE HARMFUL IF CHEWED/SWALLOWED. EYE:
CAUSES SEV EYE IRRIT. SKIN: MAY CAUSE MOD SKIN IRRIT. MAY BE ABSORB
THRU SKIN. INHAL: VAP & SPR AY MIST MAY BE HARMFUL IF INHALED.
VAPOR IRRITATES EYES, NOSE & THROAT. SANDING & GRINDING DUSTS MAY
BE(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: HARMFUL IF INHALED. VAPOR IRRITATES
EYES, NOSE & THROAT. SANDING & GRINDING DUSTS MAY BE HARMFUL IF
INHALED. RPTD EXPOS TO HIGH VAP CONC MAY CAUSE IRRIT OF RESP SYS &
PERM BRAIN & NERV SYS D MG. INTENTIONAL MISUSE BY DELIB CONC &
INHALING CONTENTS CAN BE HARMFUL/FATAL. CHRONIC: AVOID PRLNGD/RPTD
CONT.(SUPDAT)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST: DO NOT INDUCE VOMIT. EYE: FLUSH IMMED W/PLENTY OF
WATER FOR AT LEAST 30 MINS. SKIN: FLUSH IMMED W/PLENTY OF WATER,
FOLLOWED BY WATERLESS HAND CLEANER & SOAP & WATER IF MATL APPEARS
TO ADHERE T O SKIN. INHAL: REMOVE TO FRESH AIR. APPLY ARTF RESP &
OTHER SUPPORTIVE MEASURES AS REQD. OTHER: IF INGEST, ANY TYPE OF
OVEREXP/SYMPS OF OVEREXP OCCUR DURING/FOLLOWING USE OF PROD, CONT
POIS(ING 16)

Flash Point Method:PMCC
Flash Point:90.0F,32.2C
Lower Limits:1.2%
Extinguishing Media:USE NFPA CLASS B EXTING(CARBON DIOXIDE, DRY
CHEM/UNIVERSAL AQUEOUS FILM FORMING)DESIGNED TO EXTING NFPA
CLASS(SUPDAT)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
WATER SPRAY MAY BE INEFTIVE. WATER SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILD-UP(SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPARKS & OPEN FLAMES. CLSD CNTNRS MAY EXPLODE
WHEN EXPOSED TO EXTREME HEAT. DO NOT APPLY ON(SUPDAT)

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN AREA. REMOVE ALL
SOURCE OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST, VERMICULITE/OTHER
ABSORB MATL & PLACE INTO CNTNRS FOR DISP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE >120F. STORE LGE QTYS IN
BUILDING DESIGNED AND PROTECTED FOR STORAGE OF NFPA CLASS IC
FLAMMABLE LIQUIDS.
Other Precautions:IF MATL IS PART OF MULTIPLE COMPONENT SYS, READ MSDS
FOR OTHER COMPONENT/COMPONENTS BEFORE BLENDING AS RSLTG MIX MAY
HAVE HAZARDS OF ALL OF ITS PARTS. CNTNRS SHOULD BE GROUNDED WHEN
POURING. AVOID FRE E FALL OF LIQS IN EXCESS OF FEW INCHES.

Respiratory Protection:OVEREXP TO VAPS MAY BE PVNTED BY ENSURING VENT
CONTROLS, VAP EXHST/FRESH AIR ENTRY. NIOSH/MSHA APPRVD (TC-23C)AIR
PURIFYING/AIR SUPPLIED(TC-19C) RESPS MAY ALSO REDUCE EXPOS. READ
RESP MFR'S INSTRUCTIO NS & LITERATURE CAREFULLY TO (ING 17)
Ventilation:PROV GENL DILUTION/LOC EXHST VENT IN VOL & PATTERN TO KEEP
CONC OF INGS LISTED BELOW LOWEST SUGGESTED EXPOS (ING 18)
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS.
Other Protective Equipment:ANSI APPRVD EMER EYEWASH & DELUGE SHOWER.
IMPERMEABLE APRON CONSTRUCTED OF NITRILE RUBBER/NEOPRENE RUBBER.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMD CLTHG & SHOES.
Supplemental Safety and Health
EXTING MEDIA: CLASS IC FLAMM LIQ FIRES. FIRE FIGHT PROC: & POSS
AUTOIGNIT/EXPLOS WHEN EXPOSED TO EXTREME HEAT. IF WATER IS USED,
FOG NOZZ ARE PREF. EXPLO HAZ: HOT SURFS. TOX GASES MAY FORM WHEN
PROD I S CONTACTED BY FLAME/HOT SURFS. HAZ DECOMP: ANTIMONY OXIDES.
EFTS OF OVEREXP: PROD CNTNS TITANIUM DIOXIDE. (ING 10)

Boiling Pt:B.P. Text:>214F,>101C
Vapor Pres:10.1
Vapor Density:HVR/AIR
Spec Gravity:1.26
Evaporation Rate & Reference:116 (BUAC=100)
Solubility in Water:0.8%
Appearance and Odor:VISCOUS LIQUID W/AN ODOR CHARACTERISTIC OF THE
SOLVENTS LISTED.
Percent Volatiles by Volume:62.20

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING/FLAME-CUTTING MAY PRDCE FUMES INCLG:CARBON
MONOXIDE, (SUPDAT)

Waste Disposal Methods:WASTE MATL MUST BE DISPOSED OF I/A/W FEDERAL,
STATE, PROVINCIAL & LOCAL ENVIRONMENTAL CONTROL REGS. EMPTY CNTNRS
SHOULD RECYCLED OR DISPOSED OF THROUGH AN APPRVD WASTE MANAGEMENT
FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.